Our Products

RVPD(Rotocone Paddle Drier)

These dryers give drying, mixing and breaking effects simultaneously. Wet cake or slurry is fed through charging door, while the agitator is rotating in clockwise direction, Vacuum is applied in the dryer and heating media is circulated in the jacket. Evaporation of moisture takes place under vacuum and vapors passes through the dust catcher into the condenser, where it is condensed and collected in the receiver. Dried material is discharged through discharge valve. The lump breaker rods are provided to achieve good drying effect.

The unique quick opening discharge valve is operated by a hand wheel. This allows quick discharge of material and permits the dry product to be directly packed into convenient 25/50 kg bags or drums without loss of powder material.

Salient Features

  • Higher thermal efficiency due to the stirring action of product. high vacuum application and greater heat transfer area.
  • Improved product quality due to low temperature drying.
  • Full recovery of solvent is achieved.
  • Breaker bars are provided to break the lumps and disintegrate the particles size.
  • Stealite or S.S. Surface is provided at gland packing area of shaft for its long life.
  • Nitrogen purging arrangement is provided if necessary in stuffing box and at discharge point.
  • Dust catcher cleaning arrangement with pulsation by nitrogen jet or air jet injector is provided.
  • The design of paddles is such that reversal of electric motor direction is not necessary for discharging product. Hence the life of motor, gear box and equipment is increased.